New Horizons









Welcome to my blog

My name is Sven Andersson and I
work as a consultant in embedded
system design, implemented in ASIC
and FPGA.
In my spare time I write this blog
and I hope it will inspire others to
learn more about this fantastic field.
I live in Stockholm Sweden and have
my own company

Contact

You are welcome to contact me
and ask questions or make comments
about my blog.



Content

New Horizons
What's new
Starting a blog
Writing a blog
Using an RSS reader

Zynq Design From Scratch
Started February 2014
1 Introduction
Changes and updates
2 Zynq-7000 All Programmable SoC
3 ZedBoard and other boards
4 Computer platform and VirtualBox
5 Installing Ubuntu
6 Fixing Ubuntu
7 Installing Vivado
8 Starting Vivado
9 Using Vivado
10 Lab 1. Create a Zynq project
11 Lab 1. Build a hardware platform
12 Lab 1. Create a software application
13 Lab 1. Connect to ZedBoard
14 Lab 1. Run a software application
15 Lab 1. Benchmarking ARM Cortex-A9
16 Lab 2. Adding a GPIO peripheral
17 Lab 2. Create a custom HDL module
18 Lab 2. Connect package pins and implement
19 Lab 2. Create a software application and configure the PL
20 Lab 2. Debugging a software application
21 Running Linux from SD card
22 Installing PetaLinux
23 Booting PetaLinux
24 Connect to ZedBoad via ethernet
25 Rebuilding the PetaLinux kernel image
26 Running a DHCP server on the host
27 Running a TFTP server on the host
28 PetaLinux boot via U-boot
29 PetaLinux application development
30 Fixing the host computer
31 Running NFS servers
32 VirtualBox seamless mode
33 Mounting guest file system using sshfs
34 PetaLinux. Setting up a web server
35 PetaLinux. Using cgi scripts
36 PetaLinux. Web enabled application
37 Convert from VirtualBox to VMware
38 Running Linaro Ubuntu on ZedBoard
39 Running Android on ZedBoard
40 Lab2. Booting from SD card and SPI flash
41 Lab2. PetaLinux board bringup
42 Lab2. Writing userspace IO device driver
43 Lab2. Hardware debugging
44 MicroZed quick start
45 Installing Vivado 2014.1
46 Lab3. Adding push buttons to our Zynq system
47 Lab3. Adding an interrupt service routine
48 Installing Ubuntu 14.04
49 Installing Vivado and Petalinux 2014.2
50 Using Vivado 2014.2
51 Upgrading to Ubuntu 14.04
52 Using Petalinux 2014.2
53 Booting from SD card and SPI flash
54 Booting Petalinux 2014.2 from SD card
55 Booting Petalinux 2014.2 from SPI flash
56 Installing Vivado 2014.3

Chipotle Verification System
Introduction

EE Times Retrospective Series
It all started more than 40 years ago
My first job as an electrical engineer
The Memory (R)evolution
The Microprocessor (R)evolution

Four soft-core processors
Started January 2012
Introduction
Table of contents
Leon3
MicroBlaze
OpenRISC 1200
Nios II

Using the Spartan-6 LX9 MicroBoard
Started August 2011
Introduction
Table of contents
Problems, fixes and solutions

FPGA Design From Scratch
Started December 2006
Introduction
Table of contents
Index
Acronyms and abbreviations

Actel FPGA design
Designing with an Actel FPGA. Part 1
Designing with an Actel FPGA. Part 2
Designing with an Actel FPGA. Part 3
Designing with an Actel FPGA. Part 4
Designing with an Actel FPGA. Part 5

CAD
A hardware designer's best friend
Zoo Design Platform

Linux
Installing Cobra Command Tool
A processor benchmark

Mac
Porting a Unix program to Mac OS X
Fixing a HyperTerminal in Mac OS X
A dream come true

Bicycling
Stockholm by bike

Running
The New York City Marathon

Skiing/Skating
Kittelfjall Lappland

Tour skating in Sweden and around the world
Top
Introduction
SSSK
Wild skating
Tour day
Safety equipment
A look at the equipment you need
Skate maintenance
Links
Books, photos, films and videos
Weather forecasts

Travel
38000 feet above see level
A trip to Spain
Florida the sunshine state

Photo Albums
Seaside Florida
Ronda Spain
Sevilla Spain
Cordoba Spain
Alhambra Spain
Kittelfjäll Lapland
Landsort Art Walk
Skating on thin ice

Books
100 Power Tips for FPGA Designers

Favorites
Adventures in ASIC
ChipHit
Computer History Museum
DeepChip
Design & Reuse
Dilbert
d9 Tech Blog
EDA Cafe
EDA DesignLine
Eli's tech Blog
Embedded.com
EmbeddedRelated.com
FPGA Arcade
FPGA Blog
FPGA Central
FPGA CPU News
FPGA developer
FPGA Journal
FPGA World
Lesley Shannon Courses
Mac 2 Ubuntu
Programmable Logic DesignLine
OpenCores
Simplehelp
SOCcentral
World of ASIC



If you want to be updated on this weblog Enter your email here:



rss feed



 
Monday, May 05, 2014
Zynq design from scratch. Part 45.
Installing Vivado 2014.1 and SDK 2014.1

A few weeks ago Xilinx released Vivado 2014.1 and SDK 2014.1 Let's install them and find out if anything has changed and what is new. Here are the release notes.


Documentation

We can find all the documentation on the Xilinx support page. The first thing to read is the "Vivado Design Suite User Guide Getting Started". For more information see the following documents:
  • Vivado Design User Guide: Design Flows Overview (UG892)
  • Vivado Design User Guide: Embedded Processor Hardware Design (UG898)
  • Vivado Design Suite Tutorial: Embedded Hardware Design (UG940)
  • Vivado Design Suite User Guide: Designing IP Subsystems Using IP Integrator (UG994)
  • Vivado Design Suite User Guide: Using the Vivado IDE (UG893)
  • Vivado Design Suite User Guide: Design Analysis and Closure Techniques (UG906)

Installation

We will follow the instructions in part7 and only document things that have changed.

1.Download Xilinx_Vivado_SDK_Lin_2014.1_0405_1.tar.gz





2. Unzip, unpack and start the installer.





3. Select Vivado WebPACK.





4. Add the Software Development Kit (SDK)









5. Start the installation.





6. Here is the final result.





Edit .bashrc

We will add the following lines to the .bashrc file:





Licensing

For new purchases of the Vivado Licenses beginning in 2014.1, Vivado Licenses use an activation-based licensing scheme. Activation-based licensing offers robust security and return features, as well as pave the way for future licensing enhancements. For more information see the Vivado release notes (chapter 5).

Activation based licenses

Instead of requiring a file to be present to authorize a machine, Activation uses a trusted area on the client or server’s hard-drive to store the authorization credentials. This trusted storage area will automatically be installed and initialized beginning with the Vivado 2014.1 installer. When the Vivado tools look for a license feature, they are allowed to run if this trusted storage area contains the proper authorization.

License compatibility

Both certificate and activation-based licenses will be recognized by Vivado 2014.1 and later versions. If the license versions and dates are valid for the tool version being used, it does not matter whether the license is certificate or activation-based. For example, a certificate-based license issued during a previous Vivado release, which is still within the 1-year subscription period will authorize Vivado 2014.1 or later software. No conversion to a new license methodology will be necessary during the remainder of a previous subscription period.


Getting a new license file


Although we can continue using our old license file I see some advantages using an activation based license. Let's get one. Follow the instructions in part 7 to generate and download a new license file. This time we select an activation based license.





After generating the license file, it is downloaded to our $HOME/Download directory. The file is called Xilinx.lic and looks like this.





To me it looks like an XML file. Let's rename it to Xilinx.xml.


Using the Vivado License Manager

The Vivado License Manager is provided on computers with the Xilinx Vivado tools loaded. Use the command vlm to start the license manager.

-> vlm

1. Select Load Design.





3. Click "Activate License" and find the license file (Xliinx.xml).





4. Click Open to load the XML file to the trusted storage area.


Starting Vivado


-> vivado &


Here is the new start up window.





If you get a segmentation error when starting Vivado see part 8 for an explanation.


Starting SDK


-> xsdk &





We are ready to use the Vivado 2014.1 release. I have rerun lab1 and lab2 without any major problems. Almost everything worked as expected. Here are two small hiccups.

1. When starting Vivado the following errors were reported.





Easily fixed by changing the permissions for the 2014.1 directory.

-> sudo chmod 777 $HOME/.Xilinx/Vivado/2014.1

2. When running an application in SDK the following window was displayed.





Easily fixed by deleting the run configuration and creating a new one.

Top   Previous   Next


Posted at 17:54 by svenand

svenand
September 27, 2014   10:24 AM PDT
 
I don't have an answer for you. As you can see I am using VirtualBox to run Vivado and there it works for me.
Nuri
September 27, 2014   12:38 AM PDT
 
hello sven,

i have a problem while loading activation based licence to ubuntu running on vmware. Error massage is "unable to load licences rights into trusted storage". when i search through xilinx forums, it is advised that prompting "xliclientmgr" command with licence.xml file. here is the response of that command.

ERROR: API function 60009 failed, result 51412


Response processing failed.
Exit(4) error when processing response.

According to xilinx forums, this error only occurs on VMs and there is no exact solution. What should i do now ?

Thorsten
June 5, 2014   07:43 PM PDT
 
Hi,

have you managed to generate a BSP for Petalinux with Vivado/SDK 2014.1 ?

Somehow I get an error - with the simple explanation "Error generating bsp sources ...

Best, Thorsten
wch
May 30, 2014   10:54 AM PDT
 
Yes, followed Part 8, then It's working now!! Thanks so much.
wch
May 30, 2014   10:48 AM PDT
 
Dear Sir,
I did follows
"We will use the openJDK Java installation instead of the one that came with the Vivado installation."

and now it working!! thanks so much.
Svenand
May 30, 2014   10:47 AM PDT
 
That was a bad advice. See part 8 (Starting Vivado) of my blog for an explanation.
Sven
wch
May 30, 2014   10:31 AM PDT
 
Thanks for good tutorials, I got this error.
work around:
uninstall by removing the /opt/Xilinx, ~/.Xilinx

install again but still same problem.

Could you please advise?



****** v2014.1 (64-bit)
**** SW Build 881834 on Fri Apr 4 14:00:25 MDT 2014
**** IP Build 877625 on Fri Mar 28 16:29:15 MDT 2014
** Copyright 1986-2014 Xilinx, Inc. All Rights Reserved.

start_gui
/opt/Xilinx/Vivado/2014.1/bin/loader: line 112: 7884 Segmentation fault (core dumped) "$RDI_PROG" "$@"
Mohamed
May 25, 2014   12:39 AM PDT
 
hello Sven;

new begin, new tutorial , thank you for your share ;)
 

Leave a Comment:

Name


Homepage (optional)


Comments




Previous Entry Home Next Entry